TFTP CLIENT TO FLASH NETGEAR INSTALL

In the Port field, enter 69 (the default port number for TFTP).In the Host field, enter 192.168.1.1 (the default router IP address).In the Server interfaces field, select your computer’s LAN adapter.Configure Tftpd64 to connect to your router:.Select Use the following IP address and enter the following values:.Double-click Internet Protocol Version 4 (TCP/IPv4).Right-click Ethernet and select Properties.Click View network connections or press the Enter key.

Click the Windows icon in the taskbar or press the Windows key on your keyboard.

Set your computer to use a static IP address:.

Using an Ethernet cable, connect your computer directly to your router.

Download the ZIP file containing your router’s firmware update file from the NETGEAR Download Center.

TFTP CLIENT TO FLASH NETGEAR INSTALL

Download and install Tftpd64 from the Tftpd64 website.

To upload firmware to your NETGEAR router using a TFTP client on Microsoft Windows: If you do not understand any step of the process, contact NETGEAR technical support and do not proceed. Read through all of the following instructions before proceeding. Important: Uploading firmware to your router via TFTP requires more networking and computer knowledge than updating from the router web interface.

Router does not assign DHCP addresses to clients.

Router is unusable (bricked) after a firmware update.

You might want to try to upload firmware to your router via TFTP if you are experiencing any of the following symptoms: For Apple macOS computers, see How do I upload firmware to my NETGEAR router using TFTP on Apple macOS? These instructions are specific to Microsoft Windows computers.

If your NETGEAR router is unusable (bricked) or experiences other problems during or after a firmware update, you can use a TFTP client on your computer to upload firmware to your router remotely.

Tftp client to flash netgear